The environmental protection is a concern considered in the process of production: reducing dust emissions, use of recycled paper completely, rehabilitation and reforestation of careers after operation.
The plaster is non-combustible and therefore has a high fire resistance, contributes to the thermal and acoustic comfort and absorbs moisture from the air.
These features make gypsum plasterboards achieve remarkable acoustic, thermal and fire protection performance, certified by accredited laboratories which issue certifications.
Drywall systems are composed by:
• Steel profiles
• Plasterboards
• Insulating materials
• Finishing materials
• Accessories
Depending on the project you want to make (horizontal or vertical) and performance requirements (fire, acoustic, thermal, mechanical), you can combine the above five components.
FIBRANgyps systems are designed to satisfy all your needs, changing type, thickness and number of plasterboards, size of metal studs and inserting insulating material.
Drywall construction can be easily removed or modified without heavy equipment, noise or pollutants.
CE MARKING
The range of FIBRANgyps productsfor buildings complies with the provisions as described in the harmonized European Standards ' EN 520: Gypsum plasterboards"
This standard defines the different types of plasterboards.
The most important are:
Type A standard gypsum board
Type D gypsum board with density defined
Type F gypsumboard with high fire resistance
Type H plasterboard with reduced water absorption
Type I gypsum with astrength higher surface
Other standards to be complied are:
EN13950: Complexes of thermal / acoustic insulation plasterboard
EN 14190: products from reprocessing of plasterboard
EN 13963: Jointing materials for gypsum
EN 14195: Metal framing components for gypsum plasterboard systems
Plasterboard
|
|
FIBRANgyps A
|
Gypsum based board (plasterboard) standard type A , CE marked according to the standard EN 520. With one decorative ivory face .
Available with tapered edge in three different thicknesses: BA10 thickness 9,5mm, BA13 thickness 12,5mm, BA15 thickness 15mm.
Applications: Suitable for standard drywall systems, partitions with metal studs, lining systems and ceilings.
|
|
|
FIBRANgyps FLEX
|
Gypsum based board (plasterboard) standard type A , CE marked according to the standard UNI EN 520.
With one decorative ivory face .
Available with tapered edge in thickness 6 mm.
Applications: Suitable for installation in walls and ceilings curved.
|
|
|
FIBRANgyps H2
|
Gypsum based board (plasterboard) type H2, with additives to reduce the water absorption rate, CE marked according to the standard EN 520.
With one decorative green face.
Available with tapered edge in two different thicknesses: 12,5mm and 15 mm.
Applications: Suitable for partitions, lining systems and ceilings where required superior moisture resistance .
|
|
|
FIBRANgyps F
|
Gypsum based board (plasterboard) type F, with additives such as vermiculite and glass fibers to improve core adhesion at high temperature for fire resistance.
CE marked according to the standard UNI EN 520.
With one decorative pink face .
Available with tapered edge in two thicknesses: 12,5mm and 15mm.
Applications: Suitable for partitions, lining systems and ceilings where required fire resistance .
|
|
|
FIBRANgyps V
|
Gypsum based board (plasterboard) with one decorative ivory face and alu - coated on other side , CE marked according to the standard UNI EN 14190.
Available with tapered edge in two different thicknesses 9,5mm and 12,5mm.
Applications: Suitable for partitions, lining systems and ceilings where required vapour barrier.
|
|
|
FIBRANgyps AXps
|
Composite panel consisting of FIBRANgyps A plasterboard thicknesses 9,5mm or 12,5mm with extruded polystyrene FIBRANxps in different thicknesses with multiple applications and insulating properties.
The panel FIBRANgyps AXps is CE marked according to EN 13950.
Applications:Suitable for thermal insulation in lining wall systems.
|
|
|
FIBRANgyps AGeo
|
Composite panel consisting of FIBRANgyps plasterboard thickness 12,5 mm. and stonewool FIBRANgeo in different thickness.
The panel FIBRANgyps AGeo is CE marked according to EN 13950.
Applications: Suitable for thermal and acoustic insulation in lining wall systems.
|
Joint filler and Glue
|
|
|
|
FIBRANgyps JF30
|
Joint filler in powder to be mixed with water for manual application, short setting time.
To be used between 5°C e 35°C.
3B CE marked according to UNI EN 13963..
Application: Bedding compound and finishing, suitable as a first-and second-hand.
Rating water/powder 60/40
Workability time 30 minutes.
Setting time 60 minutes.
|
|
|
FIBRANgyps JF60
|
Joint filler in powder to be mixed with water for manual application, medium setting time.
To be used between 5°C e 35°C. 3B CE marked according to UNI EN 13963..
Application: Bedding compound and finishing, suitable as a first-and second-hand.
Rating water/powder 60/40
Workability time 60 minutes.
Setting time 180 minutes
|
|
|
FIBRANgyps JF120
|
Joint filler in powder to be mixed with water for manual application, normal setting time.
To be used between 5°C e 35°C. 3B CE marked according to UNI EN 13963..
Application: Bedding compound and finishing, suitable as a first-and second-hand.
Rating water/powder 60/40.
Workability time 120 minutes.
Setting time 315 minutes.
|
|
|
FIBRANgyps GLUE
|
Gypsum-based high density adhesive, in powder to be mixed with water for manual application . CE marked according to EN 14496.
Application: To be used for fixing plasterboards on walls and coupling plasterboards with insulating materials.
Workability time 90 minutes.
Setting time 480 minutes
|
.png)
